Getting the Proper Measurements For a Shutter Installation
Installing shutters is an excellent way to enhance your home’s exterior look. They also keep out chilly winds and warm summer heat.
The first step in installing shutters is to measure your window. Then, you’ll know what size shutters to order. See our home page.
Measure the Window
Getting the proper measurements for a shutter installation is essential. It ensures that you can get custom-made shutters that look great and function correctly.
To measure your window, first, check that there is a recess or space between the wall and the window. This will determine whether you will need to inside-mount or outside-mount your shutters.
If there is a recess, measure the width of your window from the inside edge to the inside edge in three places – top, middle, and bottom. Take each measurement down to the nearest 1/8 inch and record the smallest number that you have. This will be the window measurement used when you place your order with Blindster.
Measure the Frame
Whether you’re installing shutters on your own or hiring professional, accurate measurements are essential for the best fit. They also help prevent manufacturing issues and faulty installations.
The first step in measuring the frame is to determine if your window has a recess. This is an important step because it determines if you can mount your shutters inside the window opening or outside.
Measure the width of the frame in 3 places – top, middle, and bottom. You may also need to add width to the frame if there are obstructions, such as window handles or air vents.
Measure the Shutters
Shutters are a very popular choice of window coverings. They are easy to operate and child safe, making them a great choice for your home.
When ordering shutters, it’s important to measure both the width and the height of each window. This will allow you to get the perfect size for your project.
You can choose to mount your shutters recessed within the window opening or mounted directly to the wall outside of the window frame. The method that you choose will depend on how much clearance is available for the installation.
Measure the Shutter Stays
A shutter stay is an S-shaped piece of hardware that holds a shutter open. It’s a modern-day twist on the classic hinge and bolt system, and it can also be used as a decorative touch.
Typically, these are mounted at the bottom of each shutter to hold it in place when closed and securely attach the shutter to your home’s exterior. They’re available in a variety of styles and sizes, including some that boast the most impressive features. The key is to pick the right hardware for your project. This includes selecting the best hinge, stay, and other related components. The right options can make your shutters not only look good but function well.
Measure the Hinges
When it comes to shutter installation, hinges play a key role in making sure that your shutters open and close properly. This is why it’s important to measure the hinges carefully and choose the best one for your window frame and shutters.
Hinges are made up of two leaves that are pressed together to form a knuckle with a hollow center. A pin is then inserted into this knuckle to join the leaves and complete the hinge.
Hinges are available in a variety of different shapes and sizes, so it’s important to determine what you need before you buy them. Hinge measurements include width and length.
Install the Shutters
Before you can hang the shutters and the frame, you need to ensure that both pieces are in the right size. If they don’t fit, it is likely that the initial measurements you sent to the company were incorrect.
The best way to fix this is to take the window measurements again and compare them with the actual shutters that you have in hand.
If your measurements are correct, the frame should now fit well. However, if it doesn’t, you might need to adjust the hinges on each panel until they are aligned. This is usually done by loosening and tightening adjustment screws. Check this out!
